Skip to main content

Gas Line Installation in Houston, TX

Converting from electric? Adding an outdoor kitchen? Upgrading to a gas range or pool heater? We install gas lines safely, properly sized, and to code — with full permits and inspections.

Gas Line Installation — example installation by Elevated Water Solutions

Adding a gas appliance is one of the most permanent home upgrades you can make. A properly installed gas line will last decades with no maintenance. A bad install is a slow-motion safety problem. We install gas lines the way they should be done — sized correctly, routed carefully, pressure tested, and inspected.

Common gas line projects

  • Gas range conversions — converting from electric to gas in the kitchen
  • Gas dryer hookups — adding a gas line in the laundry area
  • Outdoor kitchens and grills — permanent natural gas supply for built-in grills
  • Pool heaters — high-BTU lines for natural gas pool heaters
  • Fire pits and fireplaces — natural gas supply for outdoor fire features
  • Tankless water heater upgrades — upsizing existing lines for tankless conversions
  • Standby generators — handled on our generator gas lines page

What proper gas installation looks like

  • Demand calculation for all existing and new appliances
  • Right-sized pipe for the load and run length
  • Material chosen for the environment (black iron, CSST, or copper)
  • Pipe properly supported per code
  • CSST properly bonded and grounded
  • Accessible shut-off valve at every appliance
  • Drip leg at every appliance
  • Full system pressure test before commissioning
  • Inspection by the city before the line is put into service

Every install we do meets this standard. No shortcuts on gas work.

Common Issues We Solve

Converting electric appliances to gas

Gas ranges and dryers are popular upgrades. We run the line from your main supply to the new appliance location.

Outdoor kitchen gas supply

Grills, side burners, and patio heaters all need permitted gas lines installed to code.

Pool heater gas demand

Pool heaters demand significant BTUs. We size the line for full load operation.

Fire pit and fireplace lines

Natural gas fire features require permanent supply lines, properly sized and shut-off accessible.

Adding a tankless water heater

Tankless conversions usually require gas line upgrades. We handle both jobs.

Whole-house gas line upgrades

If you're adding multiple appliances, we evaluate and upsize the main supply as needed.

Our Process

  1. 1

    Demand calculation

    We total the BTU demand of all gas appliances and verify your supply can handle the new load.

  2. 2

    Routing and material selection

    We plan the route — through walls, attics, exterior — and pick the right material (CSST, black iron, copper) for the application.

  3. 3

    Permit pull

    We pull required permits for all gas piping work.

  4. 4

    Install and connect

    Pipe is cut, fitted, supported, bonded, and connected with proper shut-off valves at each appliance.

  5. 5

    Pressure test and inspect

    Every new line is pressure tested. We coordinate inspection before the line is put in service.

Why Choose Us for Gas Line Installation

Properly sized lines

Undersized lines starve appliances and cause poor performance. We size correctly the first time.

Permitted and inspected

Gas work is inspected work in Houston. We handle permits and pass inspections.

Accessible shut-off valves

Every appliance gets an accessible shut-off valve for safety and future service.

Gas Line Installation — Common Questions

How much does gas line installation cost?

It varies significantly by length, complexity, and material. A short kitchen run is much cheaper than running a line through the attic to a backyard kitchen. We provide written estimates after assessing the project.

Can I install my own gas line?

In Texas, gas piping must be installed by a licensed master plumber and inspected. DIY gas work is illegal, dangerous, and voids homeowner's insurance coverage.

What's the difference between CSST and black iron?

Black iron is the traditional rigid pipe — durable but harder to route through tight spaces. CSST (corrugated stainless steel tubing) is flexible and faster to install. Both are code-compliant when installed correctly. We choose based on the specific project.

Gas Line Installation Throughout the Houston Metro

We provide gas line installation service across Houston and surrounding communities. Tap your city for local details.

Licensed & Insured
Same-Day Service
5-Star Rated
1-Yr Labor Warranty
11+ Years Experience
Locally Owned

Schedule Your Gas Line Installation

Get a written estimate, transparent pricing, and a 1-year labor warranty from licensed Houston plumbers.